TM 127-1.4-8.5 Thermoelectric Cooling Module
Specifications with Thot = 27°С
40 x 40 x 3.45
TM-127-1.4-8.5 is a general purpose workhorse. With 78 watts of cooling capacity, it’s our most powerful 40 x 40 mm single-stage thermoelectric module. Typically this module is powered by a 12V DC power source but can accommodate a 15V supply.
Known by our techs as “The Beast,” TM-127-1.4-8.5 can move a lot of heat but also may send a lot of heat to the “hot-side.” A great choice for applications with a (cooled) liquid heat-sink or a capable forced convection heat-sink. Frequently selected by semiconductor fabs for use in liquid-to-liquid applications.
This module is also our best choice for most thermoelectric module power generation applications, with temperatures up to 200 °C.
May be used for cooling, heating and temperature stabilization in a wide range of applications including refrigeration, consumer goods, medical, analytical, laboratory & scientific instruments, chillers, telecommunications, electro-optics, industrial and military. A version for thermal cycling is available.
Operating temperature range: -50 °C ~ +200 °C
Available with metalized (and tinned) surfaces;
In strings, of your design or ours, from 2-12 modules long.
Comprehensive Specifications (Hot-Side Temperature 27 °C)
Imax = 8.5 Amps (Imax is the maximum current at ΔTmax)
Vmax = 16 Volts (Vmax is maximum voltage at ΔTmax)
Qcmax = 78 Watts (Qcmax is maximum cooling capacity at Imax, Vmax and ΔT = 0 °C)
ΔTmax = 70 °C (ΔTmax is maximum temperature difference at Imax, Vmax and Qc = 0W)
Internal resistance = 1.50 Ω ± 10% as measured by AC 4-terminal method at 25 °C
Operating temperature range: -50 °C ~ +200 °C (Solder melting point: +235 °C)
Thickness tolerance: ± 0.025mm (Lapping to ± 0.01mm for multi-module apps available.)
Flatness and parallel variance: ± 0.05mm
Standard lead wires: 20 AWG, Tin (Sn) plated at module interface, with a maximum temperature of +105 °C
(Other wiring options available.)
Maximum recommended compression: 1MPa
Ceramics: Alumina (AL2O3) - Available with metalized and tinned surfaces
Available in strings of 2-12 modules
A version for thermal cycling is available
The lot number is printed on the center of the cold-side
Options & Designations (Suffix):
(for example: TM 127-1.4-8.5 "EL")
- Epoxy edge sealing = "E"
- RTV edge sealing = "RTV"
- Lapping to ± 0.01mm = "L"
click drawing for enlargement
Dimensions in mm
- Thermoelectric Module Overview
- Module Specifications
- Thermoelectric Fundamentals
- How A TEC Works
- Installing TE Modules
- TE Module Reliability
- Epoxy Edge Sealing
Please contact us for a quotation at email@example.com or (603) 888-2467
Thermoelectric module performance curves are graphical representations showing the relationships between power applied and net cooling for a specific TE module.
Performance curves are valuable tools for quickly determining if a TE module is a suitable COOLER for an application; learning what power is required for an appropriate module to reach the desired temperature and heat pumping capacity; and to provide the basic information necessary for proper assembly design.
Curves with Th = 27 °C indicate what to expect operating in ambient temperatures around 20 °C (70 °F) with an operational "hot-side" temperature or Th about 7 °C above ambient.
Curves with Th = 50 °C are for outdoor, box-in-box, and other applications with ambient temperatures in the 40-50 °C range.
Toll free in North America: 1 866.665.5434